ASTM-B-168 UNS N06601 Inconel 601 Plates & Sheets

Inconel 601 Plates Exporter, Manufacturer & Suppliers in India. UNS N06601 Alloy Plates Exporter, Manufacturer & Suppliers in India. Alloy 601 Inconel Supplied in Plate- AMS 5599, 5666, UNS N06601.

introduction

Dinesh Tube (India) is one of the leading exporters in all over the world. We are expertise in exporting Inconel 601 is a Ni-Cr (Nickel Chromium) alloy used for applications that require protection from corrosion and heat. Inconel 601 alloy stands out due to its resistance to high-temperature oxidation, remaining highly resistant to oxidation through 2200° F. Inconel 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high-temperature strength. It also retains its ductility after a huge amount of service exposure. It has good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601’s applications are chemical processing, thermal processing, pollution control, aerospace engines, and power generation. However, Inconel 601 cannot be used in sulphur bearing environments. Alloy 601 Plates, Alloy 601 Chequered Plate, Inconel DIN 2.4856 Plates, Inconel UNS N06601 Diamond Plates Suppliers in Mumbai, India, Inconel Alloy 601 Plates Manufacturer in India.

Inconel 601 Plates Specification :

Chemical Composition Ni Cr Al C Mn Si Fe
Inconel 601 (UNS N06001) 61.5 22.5 1.4 .05 0.3 0.2 14

Chemical Composition Of Inconel 601 Plates:

Inconel 601 Ni Fe C Mn Si Cu Cr S Al
58.0 – 63.0 Balance 0.10 max 1.0 max 0.5 max 1.0 max 21.0 – 25.0 0.015 max 1.0 – 1.7

Mechanical & Physical Properties Of Inconel 601 Plates:

Density 8.1 g/cm3
Melting Point 1411 °C (2571 °F)
Tensile Strength Psi – 80,000 , MPa – 550
Yield Strength (0.2%Offset) Psi – 30,000 , MPa – 205
Elongation 30 %