Incoloy 800HT Plates,Coils and tubes

introduction

Dinesh Tube Specializes in Supplying and Exporting Incoloy 800HT Plates , Incoloy 800HT Sheets , Incoloy 800HT Coils and Cut-to-Length Size for Plates. Inconel alloys are typically used in industries having high temperature applications. Inconel alloys are Oxidation and corrosion resistant materials well suited for service in extreme environments subjected to pressure and heat.

Specifications of Incoloy 800ht plates

Specifications : ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443

Standard :ASTM, ASME and API

Size : 0.5 MM TO 200 MM THICK IN 1000 MM TO 2500 MM WIDTH & 2500 MM TO 12500 MM LENGTH

Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)

Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

 

ALLOY 800HT CHEQUERED PLATE EQUIVALENT GRADE

STANDARD  WERKSTOFF NR. UNS
Incoloy 800HT 1.4859 N08811

 

INCOLOY 800HT COLD ROLLED SHEETS CHEMICAL COMPOSITION

Grade  Cr Fe Ni C Mn Cu Si S
Incoloy 800HT 19.5 – 23.5 1.0 max 38.0 – 46.0 0.05 max 1.0 max 1.5 – 3.0 0.5 max 0.03 max

 

ALLOY 800HT POLISHED COLD DRAWN PLATES MECHANICAL PROPERTIES

Density  Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %