Stainless Steel 317l Plates, Sheets & Coils, SS 317l Plates adn Sheets, ASTM 317l Tubes, UNS S31703 Plates:

ASTM A240 TP317l Stainless Steel Plates & Sheets
Stainless Steel 317l Plates Stockist, Stainless Steel 317l Chequered Plates, SS UNSS31703 Coils, SS Rings, ss 317l plates, ss 317l plates Suppliers.
SS UNSS31703 Perforated Sheet, 317l SS Hot Rolled Plate, 317l SS Strips Manufacturer, ss 317 plates, ss 317l sheets, Stainless Steel 317 Sheets, Stainless Steel 317l Foils Dealer in India.

introduction

Dinesh Tube (India)  is one of the leading Manufacturer, Exporter and Supplier of High-Quality ASTM A240 TP 317L Stainless Steel Plates and Sheets. We provide a wide range of SS 317L Plates and Sheets in Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange). Our range comprises of SS 317L Plates and Sheets. Available in different dimensions & grades, these stainless steel Chequered Plates and Sheets are widely used in different industries like power, engineering, construction and many more. We also offer competitive range of ss 317L Plates and Sheets in clients requirement.

Key Specifications Of SS 317L Pipes & Tubes:

Specification :
Specifications :
Specification :
Standards : ASTM A240 / ASME SA240
Size : 1/4″ to 4″
Range : 5mm To 150mm
Thickness : 4.0mm – 100mm
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
STANDARD WERKSTOFF NR. UNS JIS AFNOR BS GOST EN
SS 317L 1.4438 S31703

Chemical Composition Of Stainless Steel 317L Pipes & Tubes (UNS N08904 Pipes & Tubes):

Grade C Mn Si P S Cr Mo Ni N
317L 0.035 max 2 max 1 max 0.040 max 0.03 max 18 – 20 3 – 4 11 – 15

Mechanical properties Of SS 317L Pipes & tubes (UNS N08904 Pipes & tubes):

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %