Monel 400 Plates

Monel 400 Plates Exporter, Manufacturer & Suppliers in India.
UNS N04400 Plates Exporter, Suppliers & Manufacturer in India.

introduction

Dinesh Tube (India) is a Monel Alloy 400 Plate supplier and stock-holder, delivering world-wide. We have the largest inventory & ready stock of Monel Alloy 400 Plate in different sizes, grades & cuts. Our manufacturing program is supported by intensive in-house product inspection and testing and accredited to meet all the most recognized international standards, including ISO 9001 – 2008 Certified Co. Dinesh tube (India) specializes in Monel Alloy 400 Plate. With extensive experience in Monel Alloy 400 Plate, we offer high quality, lower cost but the best service. As a result of that, our export account today ranges all over the world. We whole-heartedly welcome your inquiries.

Dinesh Tube (India) is one of the leading exporter in all over the world. We are expertise in exporting various types of alloys in India as well as worldwide. Dinesh Tube (India) specializes in Monel 400 Plate. With years of experience in exporting Monel 400 Plate Dinesh Tube (India) has export high quality Monel 400 Plate to customers throughout the worldwide. Owing to highly experienced group of qualified professional especially for export purpose.

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel Alloy 400 Plate is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weld ability and high strength.

Characteristics of Monel 400 Plates:

• Resistant to seawater and steam at high temperatures
• Excellent resistance to rapidly flowing brackish water or seawater
• Excellent resistance to stress corrosion cracking in most freshwaters
• Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
• Excellent resistance to neutral and alkaline salt

Monel Alloy 400 Plates Grade and Specification :

Item

Monel Alloy 400 Plate

Surface

2B, No.3, No.4, HL, BA, 8K

Manufacturing process

Hot rolled, cold rolled

Thickness

1.2-100mm

Width

1000-1500mm

Length

1000-6000mm

Export to

All Over World

Monel Alloy 400 Plates Properties :

C

Mn

S

Si

Ni

Cu

Fe

.30 max

2.00 max

.024 max

.50 max

63.0 min

28.0-34.0

2.50 max

Mechanical Properties Of Monel Alloy 400 Plates :

Condition

Tensile (ksi)

.2% Yield (ksi)

Elongation (%)

Hardness (HRB)

Annealed

70-85

28-50

50-35

60-76

Typical Application of Monel 400 Plates :

• Pump shafts, oil-well tools, instruments, doctor blades and scrapers, springs, valve trim, fasteners, marine propeller shafts
• Marine components
• Chemical and hydrocarbon processing equipment
• Valves, pumps, shafts, fittings, heat exchangers

Monel 400 Plates Application Industries :

DInesh Tube (India) offer a broad range of Monel Alloy 400 Plate through a worldwide network of stock-keeping branches. These Monel 400 Plate is use in various industries like:

• Fertilizers Industry

• Aerospace Industry

• Nuclear Power Plant Industry

• Chemical Industry

• Oil & Gas Industry

• Refineries Industry

• Petrochemical Industry

• Paper Industry